Your benefits
With our
5-axis clamping vise SC5X
Machine your workpieces on all 6 sides with our 5-axis vise SC5X! Our SC5X is the crowning achievement among the 5-axis vises.
Simply choose between 5 or 6 page editing in one step. The SC5X combines all advantages – of course in best GRESSEL quality.
Best accessibility
Clamping range quick adjustment
Large jaw construction kit
Optimized against vibrations
Jaws quick change without tools
Spindle quick change system
2 spindle variants fully enclosed
Scale / Scaling
Optional 5+6 sides machining
Advantages that will
inspire you
✓ Best accessibility
On the SC5X, your workpiece is accessible from all sides for machining at the highest level.
✓ Manual or automated
Change the spindle quickly and without tools. You can easily convert the SC5X from a mechanical to an automatable 5-axis vise at any time.
✓ No loss of time during conversion
With the new quick-change jaws, you can convert the vise without tools. This massively reduces the setup time.
✓ Largest basic clamping stroke on the market
Clamping range quick adjustment up to 130 mm without conversion.
✓ Active pull-down for 6-side machining
Complete workpiece production on all 6 sides and this with the highest precision.
Our Designs
5-axis clamping vise SC5X
Important data at a glance
| Baugrösse | Spannkraft | Masse (Grundkörper) | Spannbereich maximal | Gewicht |
|---|---|---|---|---|
| SC5X-M-S L-330 | 0 – 50 kN | 330 x 125 x 142 mm | 0 – 230 mm | 26.1 kg |
| SC5X-H-S L-330 | 0 – 50 kN | 330 x 125 x 142 mm | 0 – 230 mm | 26.1 kg |
| SC5X-M-S L-430 | 0 – 50 kN | 430 x 125 x 142 mm | 0 – 330 mm | 29.1 kg |
| SC5X-H-S L-430 | 0 – 50 kN | 430 x 125 x 142 mm | 0 – 330 mm | 29.1 kg |
| SC5X-M-S L-500 | 0 – 50 kN | 500 x 125 x 142 mm | 0 – 400 mm | 31.1 kg |
| SC5X-H-S L-500 | 0 – 50 kN | 500 x 125 x 142 mm | 0 – 400 mm | 31.1 kg |
| SC5X-M-S L-630 | 0 – 50 kN | 630 x 125 x 142 mm | 0 – 530 mm | 34.8 kg |
| SC5X-H-S L-630 | 0 – 50 kN | 630 x 125 x 142 mm | 0 – 530 mm | 34.8 kg |
| SC5X-M-S L-800 | 0 – 50 kN | 800 x 125 x 142 mm | 0 – 700 mm | 39.7 kg |
| SC5X-H-S L-800 | 0 – 50 kN | 800 x 125 x 142 mm | 0 – 700 mm | 39.7 kg |
| SC5X-M L-330 | 0 – 50 kN | 330 x 125 x 181 mm | 0 – 230 mm | 32.1 kg |
| SC5X-H L-330 | 0 – 50 kN | 330 x 125 x 181 mm | 0 – 230 mm | 32.1 kg |
| SC5X-M L-430 | 0 – 50 kN | 430 x 125 x 181 mm | 0 – 330 mm | 35.1 kg |
| SC5X-H L-430 | 0 – 50 kN | 430 x 125 x 181 mm | 0 – 330 mm | 35.1 kg |
| SC5X-M L-500 | 0 – 50 kN | 500 x 125 x 181 mm | 0 – 400 mm | 37.2 kg |
| SC5X-H L-500 | 0 – 50 kN | 500 x 125 x 181 mm | 0 – 400 mm | 37.2 kg |
| SC5X-M L-630 | 0 – 50 kN | 630 x 125 x 181 mm | 0 – 530 mm | 40.8 kg |
| SC5X-H L-630 | 0 – 50 kN | 630 x 125 x 181 mm | 0 – 530 mm | 40.8 kg |
| SC5X-M L-800 | 0 – 50 kN | 800 x 125 x 181 mm | 0 – 700 mm | 45.7 kg |
| SC5X-H L-800 | 0 – 50 kN | 800 x 125 x 181 mm | 0 – 700 mm | 45.7 kg |
- 2 years warranty
- 5 + 6 side machining
- Jaws quick change
Three clamping options
The right clamping device
for your tasks
The SC5X offers the following options for mounting on the machine table integrated in the 5-axis vise. Optional: positioning and mounting holes on customer request.
Clamping with 2 fitting screws
Ø12f7/M12 and clamping screws
Alignment by precision slot nuts
20H7 in the base body in the T-slot of the machine table. Clamping with clamping claws
Alignment and clamping
with zero point clamping system GRESSEL gredoc
(2-3 locating pins)
Optional: positioning and mounting holes on customer request
Gressel 5-axis vise SC5X in use
